D-RTK 3 Multifunction Station

Presentation

The new D-RTK 3 Multi-Function Station integrates high-performance antennas and receiver modules, capable of monitoring and resolving data from major global navigation satellite systems. It supports multiple data transmission links and is capable of analyzing the position and orientation of the device via a built-in high-performance inertial measurement unit. With these impressive functions, it can act as a radar station to provide centimeter-level positioning for multiple drones simultaneously or extend the operating range of drones in relay station mode. In addition, the new Rover Station mode, combined with the DJI ENTERPRISE app and DJI Terra, offers a complete solution for high-precision aerial surveying applications.

Main features

Act as a base station for centimeter-level positioning of multiple drones or as a hub to extend the range of drones.

Advice

1. The accuracy of the measurements depends on various factors. This value is obtained under normal conditions with an unobstructed view, good satellite distribution, low ionospheric activity and without electromagnetic interference or multipath effects.

2. Severe vibrations and rapid rotations may affect the accuracy of the inertial measurement unit.

3. The relay station should be placed in a high and unobstructed location to ensure clear communication between the remote controller and the aircraft.

4. Data acquired in an outdoor environment free from obstacles and interference. ‌The above data shows the farthest communication distance for one-way and round-trip flights under each standard. During the flight, always pay attention to the RTH notifications displayed in the app.

5. Make sure all rubber plug interfaces on the body are installed correctly.

Package Contents

• D-RTK 3 × 1 Multifunction Station
• Replacement OcuSync Directional Antennas × 4
• USB-A to USB-C data cable × 1

Technical features

GNSS Frequency

GPS: L1C/A, L2C, L5

BDS: B1I, B2I, B3I, B1C, B2a, B2b

Galileo: E1, E5a, E5b, E6

GLONASS: L1, L2

QZSS: L1C/A, L2C, L5

L-Band

Rover Station Mode Accuracy

Static measurement

Horizontal: 0.8cm + 1ppm (RMS)

Vertical: 1.5cm + 1ppm (RMS)

Inclination measurement

Angle range: 0° to 60°

Horizontal: 8 mm + 0.7 mm/° tilt (accuracy <2 cm within 30°)

Maximum transmission distance (in relay station mode, unobstructed and interference-free)

FCC:

15 km between the aircraft and the relay station

1 km between the relay station and the remote control

SRRC:

12 km between the aircraft and the relay station

1 km between the relay station and the remote control

THERE IS:

8 km between the aircraft and the relay station

300 m between the relay station and the remote control

Degree of protection: IP67 (station only)

Diameter: 163 × 89 mm (without OcuSync directional antennas)

Weight: 1.26 kg